Elevator Instantaneous Safety Gear With 10,15.88,16mm Guide Rail Width
The instantaneous safety gear is a critical safety component in elevator systems, designed to stop and hold the elevator car or counterweight immediately in the event of an overspeed or free-fall scenario. Unlike progressive safety gears, which apply braking force gradually, instantaneous safety gears engage abruptly, ensuring rapid deceleration to prevent accidents.
This mechanism typically consists of a wedge or cam system that locks onto the guide rails when triggered by a speed governor or centrifugal device. Once activated, the friction between the safety jaws and rails brings the elevator to an emergency stop. It is commonly used in low to medium-speed elevators, where immediate stopping is prioritized over smooth deceleration.
Product description
| Rated speed(m/s) | Acting speedof governor(m/s) | Permitted P+Q(kg) | Rail width(mm) | External dimension
(LxWxH)(mm) | Certifcation |
| ≤0.63 | ≤1.0 | ≤2000 | 10,,15.88,16 | 126x90x140 | GB |
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.
Product Tags:
|
|
Elevator Instantaneous Safety Gear With 10 , 15.88 , 16mm Guide Rail Width Images
|
